• Projektor Panasonic PT-DW730S

Symbol: PT-DW730S
Brak towaru
39999.00
Wpisz swój e-mail
Wysyłka w ciągu 2-4 dni
Cena przesyłki 0
Odbiór osobisty 0
Kurier UPS darmowy 0
Odbiór osobisty po przedpłacie 0
Kurier UPS płatny 19
Kurier UPS (za pobraniem) 25
Wysyłka ekranu poniżej 250 cm 150
Wysyłka ekranu poniżej 250 cm za pobraniem 190
Wysyłka ekranu powyżej 250 cm długości 190
Wysyłka ekranu powyżej 250 cm długości za pobraniem 250
Dostępność Brak towaru
Zostaw telefon
Model PT-DW730S  
Power supply PT-DW730US 120 V AC, 7.5 A, 50/60 Hz
PT-DW730ES 220-240 V AC, 4.3 A, 50/60 Hz
Power consumption PT-DW730US 790 W (830 VA) at 120 V AC
(0.2 W at 120 V AC when standby mode set to eco*1,
8 W at 120 V AC when standby mode set to normal. Both with fan stopped.)
PT-DW730ES 760 W (950 VA) at 240 V AC
(0.3 W at 220-240 V AC when standby mode set to eco*1,
9 W at 220-240 V AC when standby mode set to normal. Both with fan stopped.)
DLP™ chip Panel size 16.5 mm (0.65 inches) diagonal
(16:10 aspect ratio)
 
Display method DLP™ chip × 1, DLP™ projection system
Pixels 1,024,000 (1,280 × 800) pixels  
Lens PT-DW730S Powered zoom (throw ratio 1.8 – 2.5:1), powered focus F 1.7–1.9, f 25.6 – 35.7 mm
PT-DW730LS Optional powered zoom/focus lenses and fixed-focus lens
Lamp 300 W (max. 310 W) UHM lamp × 2
Screen size (diagonal) 1.27 – 15.24 m (50 – 600 inches),
1.27 – 5.08 m (50 – 200 inches) with
the ET-DLE055, 16:10 aspect ratio
 
Brightness*2 7,000 lm (dual-lamp, lamp mode: high)  
Center-to-corner uniformity*2 90 %
Contrast*2 2,500:1 (full on/full off, contrast mode: high*3)  
Resolution 1,280 × 800 pixels (Input signals that
exceed this resolution will be
converted to 1,280 × 800 pixels.)
 
Scanning
frequency
DVI-D fH: 15 – 91 kHz, fV: 50 – 85 Hz, dot clock: 162 MHz or lower
RGB fH: 15 – 91 kHz, fV: 50 – 85 Hz, dot clock: 150 MHz or lower
YPBPR (YCBCR) fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080/24p]
fH: 33.75 kHz, fV: 30 Hz [1080/30p]
fH: 56.25 kHz, fV: 50 Hz [1080/50p]
 
Video/
S-Video
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical
axis shift
Vertical +60% from center of screen
(powered)
 
Horizontal ±10% from center of screen
(powered)
 
Keystone correction range Vertical: ±40° (±30° with the ET-DLE055/DLE080)
Installation Ceiling/floor, front/rear
Terminals DVI-I D IN DVI-D 24-pin × 1
(DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p,
1080/60p, 1080/50p, VGA (640 × 480) – WUXGA (1,920 × 1,200)*4,
compatible with non-interlaced signals only, dot clock: 25 – 162 MHz
RGB 1 IN BNC × 5 (RGB/YPBPR/YCBCR × 1)
RGB 2 IN D-Sub HD 15-pin (female) × 1 (RGB/YPBPR/YCBCR × 1)
VIDEO IN BNC × 1 (composite video)
S-VIDEO IN Mini DIN 4-pin × 1 (S-Video)
SERIAL IN D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) × 1 for link control (RS-232C compliant)
REMOTE 1 IN M3 × 1 for wired remote control
REMOTE 1 OUT M3 × 1 for link control (for wired remote control)
REMOTE 2 IN D-sub 9-pin (female) × 1 for external control (parallel)
LAN RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Cabinet materials Molded plastic
Dimensions
(W × H × D)
PT-DW730S 498 × 175*5 × 466*6 mm (19-19/32˝ × 6-7/8˝ *5 × 18-11/32˝ *6)(with supplied lens)
PT-DW730LS 498 × 175*5 × 432*6 mm (19-19/32˝ × 6-7/8˝ *5 × 17˝ *6) (without lens)
Weight PT-DW730S Approximately 16.3 kg (35.9 lbs) (with supplied lens)
PT-DW730LS Approximately 15.4 kg (34.0 lbs) (without lens)
Operating environment Operating temperature: 0°C – 45°C (32°F – 113°F)*7,
operating humidity: 20% – 80% (no condensation)
Supplied accessories Power cord, power cord secure lock, wireless/wired remote control unit,
batteries (R6/AA type × 2)
  • *1 When the standby mode is set to eco, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
  • *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
  • *3 Brightness : 3,500 lm for the PT-DW730S/DW730LS; 4,000 lm for the PT-DX800S/DX800LS.
  • *4 Compliant with VESA CVT-RB.
    *5 With legs at shortest position.
  • *6 Protruding parts not included.
    *7 The operating temperature range is 0°C to 40°C (32°F to 104°F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40°C (104°F) (35°C (95°F) in High Altitude mode) when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately 20% to protect the projector.