• Projektor Panasonic PT-DW530

Symbol: 5025232579075
Brak towaru
16525.00
Wpisz swój e-mail
Wysyłka w ciągu 2-4 dni
Cena przesyłki 0
Odbiór osobisty 0
Kurier UPS darmowy 0
Odbiór osobisty po przedpłacie 0
Kurier UPS płatny 19
Kurier UPS (za pobraniem) 25
Wysyłka ekranu poniżej 250 cm 150
Wysyłka ekranu poniżej 250 cm za pobraniem 190
Wysyłka ekranu powyżej 250 cm długości 190
Wysyłka ekranu powyżej 250 cm długości za pobraniem 250
Dostępność Brak towaru
Zostaw telefon
Excellent Image Quality
RGB Booster Significantly Improves Color Reproduction
The RGB Booster achieves high image quality with levels of color reproduction and brightness that make each color stand out. It combines Panasonic’s proprietary Vivid Color Control technology with a Lamp Modulation Drive System for a 1-chip DLP™ projector that produces bright and vivid colors.    

Vivid Color Control
This unique control technology optimizes the use of the color segment areas of the color wheel. It increases the brightness of each RGB color by minimizing the unallocated portions between the colors, to achieve truly vivid coloring.
 

Lamp Modulation Drive System
With the advanced lamp modulation technology, the projector is now able to control the lamp intensity for each of the red, green, blue and white segments of the color wheel separately. Because the actual light output is controlled in relation to each color segment, light usage is optimized and color balance is obtained without lowering the brightness. This results in bright, vivid images with increased color fidelity.
 

A Full 4,500/4,000 Lumens of Brightness and Contrast of 2,000:1

The 300-watt AC lamp unit features an efficient light focusing reflector. Using only a single lamp unit, the PT-DX500 achieves 4,500 lumens of brightness, while the PT-DZ570 and PT-DW530 offer 4,000 lumens. All models boast a high contrast ratio of 2,000:1.

 
300-watt AC Lamp
Full HD-ready WUXGA Resolution (PT-DZ570)

In response to the increasing popularity of widescreen image viewing, including Blu-ray content, the PT-DZ570 features native WUXGA resolution for high-definition viewing. This brings you lifelike projection of intricate, highly detailed images.

 

Detail Clarity Processor 3 Brings Depth and Clarity to Details

The frequency of the video signal is analyzed for each scene, and distribution data is extracted for the ultra high, high, medium and low-range frequencies. This unique Panasonic image correction circuit optimally enhances each area of the screen. High-precision detection is applied from 2-dimensional horizontal/vertical data to produce more natural, lifelike images with high definition.


Detail Clarity Processor 3 Brings Depth and Clarity to Details
Daylight View Premium for Better Color Perception*

This function corrects the image quality to project sharp, clear images even in brightly lit rooms. A luminance sensor measures the ambient brightness, and a realtime adjustment function optimizes sharpness and brightness according to the surroundings. This adjustment function also works together with the Detail Clarity Processor 3 to enhance the realism and vividness of projected images. This makes images easier to view and offers high contrast.

* There is no actual change in the rated brightness or contrast ratio.


Waveform Monitor Function (PT-DZ570)

When the output level of the source device fluctuates due to the performance of the device or its cable connections, the original black and white levels of the image content cannot be reproduced correctly. With the PT-DZ570, you can view the waveforms on the screen and adjust the settings either automatically or manually as you prefer.



DICOM Simulation Mode*

This imaging mode is similar to DICOM Part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity. It also allows information to be shared by many viewers on a large screen, such as during conferences or training courses.

* This product is not a medical instrument.
Do not use it for actual medical diagnosis.

 

Rec. 709 Mode for HDTV Projection

Optimal color reproduction can be achieved by selecting this mode, compliant with ITU-R Recommendation BT.709, when images from an HDTV source are projected.

Advanced Technologies for Excellent Image Quality

• 3D color management system
• Full 10-bit image processing
• Progressive cinema scan (3:2 pulldown)
• Dynamic sharpness control
• Digital noise reduction
• IP conversion
• AI scene control
 

Improved Reliability and Reduced Maintenance
Newly Designed Original Cooling System

The cooling system is newly designed to optimize the airflow inside the unit. As a result, it offers better cooling efficiency and allows the projector to be used in ambient temperatures up to 45°C (113°F).*

* The operating temperature range is 0°C to 40°C (32°F to 104°F ) when the fan control is set to HIGH Altitude mode ( for over 1,400 m [4,593 ft ] to 2,700 m [8,858 ft ] above sea level ).

Lamp and Lamp Air Filter Replacement Cycle of 2,000 Hours*

The new cooling system combines with a dust-resistant design based on a sealed optical block to achieve a lamp and lamp air filter replacement cycle of 2,000 hours.* This greatly reduces maintenance hassles.

* When a lamp mode is set to NORMAL. The lamp replacement cycle is 3,000 hours when the lamp mode is set to ECO. A maximum value when the lamp is used in cycles of being turned on for 2 hours and off for 0.25 hours. When the lamp is turned on and off more frequently, the lamp replacement cycle is shortened.

Easy Lamp Replacement

For easier maintenance, you can replace the lamp from the rear. The lamp is easily replaced even after the projector is installed on the ceiling.

 
Quiet 29 dB* Operation

An original cooling system enhances the compact body and enables the projector to operate at a quiet 29 dB.*

* When the lamp mode is set to ECO; 35 dB when the lamp mode is set to Normal. Measurement, measuring conditions and method of notation all comply with ISO 21118 international standards.

Web Browser Control over a Wired LAN Network
Web Browser Control over a Wired LAN
The PT-DZ570 Series can be easily operated remotely over a LAN, because it is done using the computer’s Web browser. Furthermore, the projector sends an email message to notify the operator when an error has occurred, or a lamp needs to be replaced.
 

PJLink™ Compatibility
The LAN terminals support PJLink™ class 1 connection. Control with the same specifications is also possible when used in a multi-projector system with projectors of another brand.
  PJLink™

Multi Projector Monitoring and Control
Software Ver. 2

Panasonic’s original freeware “Multi Projector Monitoring and Control Software Ver. 2” allows the user to control and monitor multiple projectors at the same time over a wired LAN. When a problem occurs, an alarm message is sent to the monitoring/controlling PC.
 

Basic Concept of the Multi Projector Monitoring and Control Software



 

Installation/Operation Flexibility
H/V Lens Shift and 2x Zoom Lens
In new installations, the horizontal/vertical lens shift lets you accommodate a wide range of room sizes and shapes. And when replacing existing projectors, the 2x zoom greatly enhances your ease of installation and can reduce costs by permitting the use of existing mounting positions and cablings.


Note: Optical axis shift of the PT-DW530 is vertical+70%/ horizontal ±10% (manual).


Note: This illustration shows the projection distances of the PT-DZ570.
Flexible Angle Setting

The unit can be rotated 360° vertically. This means you can install it at any up-and-down angle you wish to accommodate different installation conditions.


Lens-centered Design

A lens-centered, symmetrical design provides ease of installation, eliminating the need for any special considerations when planning the installation site.

 

Multiple Terminals

 

Interfaces include a DVI-D and HDMI inputs. The serial terminal (RS-232C) has an Emulate function that lets you continue using existing control systems when replacing a previous Panasonic model. It is also possible to output audio during Standby mode. This is convenient when connecting an external audio system through the projector.

 
Notes:
The photo shows the PT-DZ570/DW530. Note that the DVI-D input terminal on the PT-DX500 is located between the LAN connector and the HDMI input.

Side-by-Side Function*

The PT-DZ570/DW530 can simultaneously display images from two sources onto a single screen. For example, you can display a PC image on the left and a video image on the right. Taking advantage of the wide-screen projection, this function gives you a host of new application possibilities to explore.

* This function is not effective for some source combinations.

 
Easy Wireless Projection from Multiple PCs (Optional)

The optional Wireless Module ET-WM200 allows the PT-DZ570 Series to operate wireless projection for a smooth, hassle-free presentation. You can make the settings for wireless connection quickly and easily using Wireless Manager ME 5.5 software. When the presentation is finished, Wireless Manager restores the PC to its previous LAN settings, so the PC is ready to reconnect to your LAN.
Functions include Live mode and Multi-Live mode. In Live mode, the image projected is identical to the image seen on the PC screen. In Multi-Live mode, you can wirelessly connect with multiple PCs.


Wireless Projection
 

Multi-Live Mode
Wireless Transmission Also Possible* from an iPad or iPhone (Option**)
Panasonic Wireless Projector for iOS is an iOS application that lets you send PDF files and JPEG images from an iPad, iPhone or iPod touch over a wireless connection. JPEG images saved onto an iPad, iPhone or iPod touch, and PDF files transferred to the Panasonic Wireless Projector for iOS application via iTunes can be sent. Easy touch screen operation also lets you rotate, enlarge, or reduce images (using a pinch operation), and flip through pages (using a flick operation). Now you can give the kind of smart presentations that are simply not possible with conventional projectors.   Wireless PJ
Panasonic Wireless Projector for iOS can be downloaded for free from the App Store.
For operating details, see the iPad/iPhone/iPod touch Application Guide.

* Requirements: Compatible with iPhone, iPod touch, and iPad. Requires iOS 4.1 or later.
** The ET-WM200 Wireless Module is required.


Eco Management Functions

A number of functions are provided to reduce power consumption. They adjust the brightness according to the ambient light conditions and reduce the lamp power when there is no signal input or the projector is in the AV Mute mode.

 

Easy-to-Use Wireless Remote Control with a Maximum Operating Range of 15m(49ft)

Two signal transmission ports are provided, extending the remote control operating range to a maximum of 15m(49ft) for use in large conference rooms and classrooms. Function buttons are also provided to allow the setting of up to three frequently used functions of your choice.

 
Direct Power Off

The cooling fan continues to operate even when the main power switch is turned off after projection is finished. This also allows the power to be turned off by directly switching off the room’s main breaker for systems, such as ceiling mounted systems, where the main power switch cannot be reached.

 
Scheduling Function

Scheduled operation is possible using the built-in timer function, without having to use a PC and software. For example, when using the projector for digital signage in a store, it can be set to operate with two lamps in the daytime and one lamp at night.

Other Valuable Features
• Security features: user password, text superimposing and logo (default or original)
• HDTV compatibility
• AV mute for image/sound muting
• Selectable 9-language on-screen menu
• Built-in closed caption decoder

Main Parts and Controls







  PT-DW530
DLP™ chip Panel size 16.5 mm (0.65 inches) diagonal, 16:10 aspect ratio
Display method DLP™ chip x 1, DLP™ projection system
Pixels 1,024,000 (1,280 x 800) pixels
Lens Manual zoom (2x zoom), manual focus F 2.0-3.4, f 21.5-43.0 mm
Lamp 300 W (max. 310 W) UHM lamp
Screen size 1.02-7.62 m (40-300 inches), 16:10 aspect ratio
Brightness*1 4,000 lumens (lamp mode: NORMAL)
Center-to-corner uniformity*1 90%
Contrast*1 2,000:1 (full on/full off)
Resolution 1,280 x 800 pixels (Input signals that exceed this resolution will be
converted to 1,280 x 800 pixels.
Scanning frequency HDMI/DVI-D fH: 27 kHz-100 kHz, fV: 24 Hz-120 Hz, dot clock: 25 MHz-162 MHz
RGB fH: 15 kHz-100 kHz, fV: 24 Hz-120 Hz, dot clock: 162 MHz or lower
YPBPR (YCBCR) 480i (525i): fH 15.75 kHz; fV 60 Hz
576i (625i): fH 15.63 kHz; fV 50 Hz
480p (525p): fH 31.50 kHz; fV 60 Hz
576p (625p): fH 31.25 kHz; fV 50 Hz
720 (750)/60p: fH 45.00 kHz; fV 60 Hz
720 (750)/50p: fH 37.50 kHz; fV 50 Hz
1035/60i: fH 33.75 kHz; fV 60 Hz
1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz
1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz
1080/25p: fH 28.13 kHz; fV 25 Hz
1080/24p: fH 27.00 kHz; fV 24 Hz
1080/24sF: fH 27.00 kHz; fV 48 Hz
1080/30p: fH 33.75 kHz; fV 30 Hz
1080/60p: fH 67.50 kHz; fV 60 Hz
1080/50p: fH 56.25 kHz; fV 50 Hz
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Vertical +70% from center of screen (manual)
Horizontal ±10% from center of screen (manual)
Keystone correction range Vertical ±40°
Installation Ceiling/floor, front/rear
Terminals HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480) -WUXGA (1,920 x 1,200)*2; compatible with non-interlaced signals only; dot clock: 25-162 MHz
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480)-WUXGA (1,920 x 1,200)*2; compatible with non-interlaced signals only; dot clock: 25-162 MHz
RGB 1 IN BNC x 5 (RGB/ YPBPR x 1)
RGB 2 IN D-sub HD 15-pin (female) x 1 (RGB/ YPBPR x 1)
VIDEO IN BNC x 1 (composite video)
S-VIDEO IN Mini DIN 4-pin x 1 (S-Video)
AUDIO IN 1 RCA x 2 (L, R x 1), 0.5 Vrms
AUDIO IN 2 M3 x 1 (L, R x 1), 0.5 Vrms
AUDIO IN 3 M3 x 1 (L, R x 1), 0.5 Vrms
AUDIO OUT M3 x 1 (L, R x 1) (monitor out: 0-2.0 Vrms, variable)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
REMOTE IN D-sub 9-pin (female) x 1 for external control (contact control)
LAN RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
WIRELESS MODULE Connector for optional wireless module ET-WM200 x 1
Power cord length 3.0 m (9 ft 10 in)
Power supply 100-240 V AC, 5.0-1.9 A, 50/60 Hz
Power consumption 415 W (500 VA) (0.3 W at 100-120 V AC, 0.4 W at 220-240 V AC with standby mode set to ECO*3, 15 W with standby mode set to NORMAL)
Dimensions (W x H x D) 332 x 168*4 x 484.5 mm (13-1/16˝ x 6-5/8˝ *4 x 19-1/16˝ ) (including the lens)
Weight Approximately 8.5 kg (18.7 lbs.)
Operating temperature 0°C-45°C (32°F-113°F)
Operating humidity 20%-80% (no condensation)
Supplied accessories Power cord with security lock, wireless remote control unit, batteries for remote control (AA type for North America, R6/LR6 type for Europe and Asia) x 2, wire rope, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software Ver. 2, Wireless Manager ME 5.5)

*1:  Measurement, measuring conditions and method of notation all comply with ISO 21118 international standards.
*2:  Compliant with VESA CVT-RB.
*3:  When the standby mode is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
*4:  With legs at shortest position.